For 3 phases compressor: 7.5kw compressor uses 4 square meters of wires, the breaker/air switch uses 32A. 11kw compressor uses 6 square meters of wires, the circuit breaker uses 56A. 15kw compressor uses 8 square meters of wires, the circuit breaker…
How to adjust the MAM890 plc after the maintenance?
2. Adjust set data as below.OIL FILTER SET: 2000HO-A FILTER SET: 2000HAIR FILTER SET: 2000H LUBE SET: 2000HGREASE RESET: 2000HBELT RESET: 0000H
How to adjust the data after you do the maintenence?
Change the time data for the used and unused oil and filters every time when you do the maintenance. Filters Set, Lubricate Water Set, Grease Set change into 2000 H, Filters Used, Lubricate Water Set, Grease Set change into 0 H.
How to do the maintenance for the screw compressor?
Oil brand: Shell or Mobil ISO 46, synthetic compressor oil. After replace the filters, need to adjust the data for the oil and filters. If you don’t know how, please contact info@prcompressor.com.
How to connect the wires of the compressor and dryer?
For the 3 phases compressor usually needs to be connected with the 3 live wires and 1 ground wire. Some compressors also need to be connected with the neutral wire. If the compressor alarms or shows “phase wrong”, then need to…
How to connect the air compressor system?
The right way to connect the pipeline. Compressor-high pressure oil tube-tank-Q precision filter-high pressure oil tube-dryer-P-S precision filter. Make sure all bolts are tightened with the thread seal tapes.
Textile Industry
Textile is the industry who use a lot of compressed air, so they spend a lot of money for the electric cost to operate the compressor, however, many customer still use the old style compressor, which lead to them waste a…
Cement Industry
Cement industry is key industry for the infrastructure, at the same time, it’s a industry who need to use a lot of power to produce their products-cement. During cement manufacturing, the compressed air is the necessary power to support its manufacturing…
Power Station Industry
Wind Power station is an industry which will need a lot of compressed air to help the safe and clean operation of the station, the screw compressor play a very important role for this industry. Nowadays, not just manufacturing factory is…
Manufacturing Industry
Compressed air is a forth source for the manufacturing industry. It’s a clean and safe power, so it’s widely used as air power for the different application, like the pneumatic tool, automatic control, metal processing etc.. However, it’s also a key…
