Step 1: Press PRG, show P0, press UP, till show PP, press ENTER show PP.00, press UP show PP.01, press ENTER, show 0 or 0000, press UP, last 0 change into 1, press ENTER, show PP.02 or PP.00. This purpose of…
How to check if the inverter is broken?
2. If it still shows, then need to check the inverter. Remove off U, V, W wires from the inverter, press PRG, show P0, enter, show P0.00, change into P0.01, enter, show 0, change into 2, enter, press PRG and start…
How to change the language of the compressor on MAM6070?
Enter into 用户参数-Press 2 times of Down-press last second line “中文” then it will change into English.
How to change the language of the compressor on MAM890 PLC?
Home page-press down-enter into 用户参数-press down and find 语言选择
How to choose the wire and the breaker for the air compressor?
For 3 phases compressor: 7.5kw compressor uses 4 square meters of wires, the breaker/air switch uses 32A. 11kw compressor uses 6 square meters of wires, the circuit breaker uses 56A. 15kw compressor uses 8 square meters of wires, the circuit breaker…
How to adjust the MAM890 plc after the maintenance?
2. Adjust set data as below.OIL FILTER SET: 2000HO-A FILTER SET: 2000HAIR FILTER SET: 2000H LUBE SET: 2000HGREASE RESET: 2000HBELT RESET: 0000H
How to adjust the data after you do the maintenence?
Change the time data for the used and unused oil and filters every time when you do the maintenance. Filters Set, Lubricate Water Set, Grease Set change into 2000 H, Filters Used, Lubricate Water Set, Grease Set change into 0 H.
How to do the maintenance for the screw compressor?
Oil brand: Shell or Mobil ISO 46, synthetic compressor oil. After replace the filters, need to adjust the data for the oil and filters. If you don’t know how, please contact info@prcompressor.com.